Oral delivery of posaconazole-loaded phospholipid-based nanoformulation: Preparation and optimization using design of experiments, machine learning, and TOPSIS.

Phospholipid-based nanosystems show promising potentials for oral administration of hydrophobic drugs. The study introduced a novel approach to optimize posaconazole-loaded phospholipid-based nanoformulation using the design of experiments, machine learning, and Technique for Order of Preference by Similarity to the Ideal Solution. These approaches were used to investigate the impact of various variables on the encapsulation efficiency (EE), particle size, and polydispersity index (PDI). The optimized formulation, with %EE of âˆ¼ 74 %, demonstrated a particle size and PDI of 107.7 nm and 0.174, respectively. The oral pharmacokinetic profiles of the posaconazole suspension, empty nanoformulation + drug suspension, and drug-loaded nanoformulation were evaluated. The nanoformulation significantly increased maximum plasma concentration and the area under the drug plasma concentration-time curve (∼3.9- and 6.2-fold, respectively) and could be administered without regard to meals. MTT and histopathological examinations were carried out to evaluate the safety of the nanoformulation and results exhibited no significant toxicity. Lymphatic transport was found to be the main mechanism of oral delivery. Caco-2 cell studies demonstrated that the mechanism of delivery was not based on an increase in cellular uptake. Our study represents a promising strategy for the development of phospholipid-based nanoformulations as efficient and safe oral delivery systems.

Preparation and Characterization of Lidocaine-Loaded, Microemulsion-Based Topical Gels.

Microemulsion-based gels (MBGs) were prepared for transdermal delivery of lidocaine and evaluated for their potential for local anesthesia. Lidocaine solubility was measured in various oils, and phase diagrams were constructed to map the concentration range of oil, surfactant, cosurfactant, and water for oil-in-water (o/w) microemulsion (ME) domains, employing the water titration method at different surfactant/cosurfactant weight ratios. Refractive index, electrical conductivity, droplet size, zeta potential, pH, viscosity, and stability of fluid o/w MEs were evaluated. Carbomer® 940 was incorporated into the fluid drug-loaded MEs as a gelling agent. Microemulsion-based gels were characterized for spreadability, pH, viscosity, and in-vitro drug release measurements, and based on the results obtained, the best MBGs were selected and subsequently subjected to ex-vivo rat skin permeation anesthetic effect and irritation studies. Data indicated the formation of nano-sized droplets of MEs ranging from 20 - 52 nm with a polydispersity of less than 0.5. In-vitro release and ex-vivo permeation studies on MBGs showed significantly higher drug release and permeation in comparison to the marketed topical gel. Developed MBG formulations demonstrated greater potential for transdermal delivery of lidocaine and advantage over the commercially available gel product, and therefore, they may be considered as potential vehicles for the topical delivery of lidocaine.

Measurement of Hansen Solubility Parameters of third-degree burn eschar.

Topical drug therapy is one of the most effective approaches in third-degree burn wound treatments. To optimize and enhance drug permeation through burn eschar, we need to characterize this barrier, most importantly, its affinity to drugs; the subject of this investigation. Hansen Solubility Parameters (HSP), as polarity and affinity scale, were measured here for human third-degree burn eschar through uptake studies using 19 solvents at 25 °C and 32 °C and two hydration levels by gravimetric method combined with thermal analysis and Karl Fischer titration. HSP parameters of dispersion (δD), bipolar (δP), and hydrogen bonding (δH) were calculated by HSPiP software. Results showed δD, δP, and δH of 17.0, 12.5, 14.6 and 16.8, 12.4, 14.4 at 25 and 32 °C respectively for normally-hydrated samples. Full hydration increased HSP values to 17.2, 12.9, 15.3 (25 °C) and 17.1, 12.8, 15.1 (32 °C). Good correlations between solvents uptakes and HSP values were observed for all parameters; higher for δP. Increased temperature decreased them with more changes in δH. Relative Energy Differences (RED) were calculated and shown to be a good parameter for predicting drug-eschar affinity. The obtained information is useful for drug selection and carrier design in drug delivery through burn eschar.

Application of SPRA Technology for Delivery of Erythropoietin: Stability Evaluation of Conjugated Erythropoietin with Adamantane and in SPRA Inclusion Complex.

Background: As a widely used therapeutic protein, recombinant human erythropoietin (rhEPO) is currently one of the most effective biopharmaceuticals on the market for the treatment of anemia in patients with chronic renal disease. Increasing in vivo rhEPO half-life and its bioactivity is a significant challenge. It was hypothesized that the application of self-assembly PEGylation retaining activity, named supramolecular (SPRA) technology, could prolong the protein half-life without a significant loss of bioactivity. Objectives: This study aimed to assess the stability of rhEPO during synthetic reactions, including the conjugation with adamantane and the formation of the SPRA complex. To do this, the secondary structure of the protein was also evaluated. Methods: FTIR, ATR-FTIR, Far-UV-CD, and SDS-PAGE methods were employed. Thermal stability studies of SPRA-rhEPO complex and rhEPO were investigated at 37°C for ten days using a nanodrop spectrophotometer. Results: The secondary structure of lyophilized rhEPO, AD-rhEPO, and rhEPO (pH 8) was compared to rhEPO. Results showed that the secondary structure of the protein was unaffected by lyophilization, pH change, and the formation of covalent bonds in conjugation reaction. SPRA-rhEPO complex was also stable for seven days in phosphate buffer (pH 7.4) at 37°C. Conclusions: It was concluded that the stability of rhEPO could increase by complexation using SPRA technology.

Brinzolamide-loaded nanoemulsions: ex vivo transcorneal permeation, cell viability and ocular irritation tests.

The aim of this study was to investigate the corneal penetration of brinzolamide (BZ) nanoemulsions (NEs) and evaluate their in vitro and ex vivo irritancy potential. Twelve BZ NEs were prepared by the spontaneous emulsification method and ex vivo permeability studies were conducted using excised bovine corneas fixed onto Franz diffusion cells. To confirm the safety of the formulations for ophthalmic use, preparations were examined for potential ocular irritancy using a cell viability assay on retinal cells, the Hen's Egg Test-Chorio-Allantoic Membrane (HET-CAM) and the bovine corneal opacity-permeability (BCOP) test. Seven BZ NEs exhibited superior penetration across isolated bovine cornea compared to the marketed BZ suspension. The half maximal inhibitory concentration (IC50) values of various surfactants and oils determined using the sulforhodamine B cell viability assay on retinal cells showed that Transcutol P, Cremophor RH40 and Triacetin were the least toxic excipients and may be safely used in the eye at various concentrations. HET-CAM and BCOP tests revealed that NE6B and NE4C did not result in any irritation and were thus considered safe for ocular use. Our finding suggests that optimized NEs can be a safe and effective vehicle for ocular delivery of BZ.

Rapamycin-Loaded, CapryolTM 90 and Oleic Acid Mediated Nanoemulsions: Formulation Development, Characterization and Toxicity Assessment.

This study was planned to explore the capability of nanoemulsions (NEs) consisting of CapryolTM 90 and oleic acid for the delivery of rapamycin (RAP). Permeability and cytotoxicity of RAP-loaded NEs were also inspected. Pseudo-ternary phase diagrams were created with oleic acid and CapryolTM 90 (as oil phase) and four surfactants and co-surfactants at various weight ratios (Rsm). Selected NEs from O/W region on the phase diagrams with the drug concentration of 1 mg/mL, were prepared via the spontaneous emulsification technique, characterized for particle size and subjected to stability tests at various temperatures over 9-12 months. Cumulative drug release was determined for a period of 48 h using a dialysis sac. The assay of RAP was determined using HPLC technique. Cytotoxicity of NEs was evaluated by MTT assay on breast cancer cell line, namely SKBR-3. The permeability of RAP-loaded NEs across Caco-2 monolayers was assessed by measurement of TEER (transepithelial electrical resistance) value. The intracellular uptake of coumarin 6-loaded NEs by SKBR-3 cells was also investigated using florescence microscopy. NEs containing oleic acid/Tween 20/propylene glycol, CapryolTM 90/Tween 20/iso-propanol, and CapryolTM 90/Cremophor® RH40/Transcutol® P showed more cytotoxicity and permeability compared with the RAP methanolic solution. The minimum toxic concentration of RAP in NE formulations was found to be 7.5 µg/mL. The highest intracellular uptake was observed for the NE composed of CapryolTM 90/Tween 20/iso-propanol which was in consistent with the results obtained from cytotoxicity and permeability tests. The overall results implicated that this novel carrier was effective for enhancing RAP permeation in Caco-2 cell membrane along with enhancement of cytotoxicity.

Formulation Development and Evaluation of the Therapeutic Efficacy of Brinzolamide Containing Nanoemulsions.

Brinzolamide (BZ) is an intraocular pressure reducing agent with low bioavailability. The purpose of the present study was to overcome this issue by development of BZ containing nanoemulsions (NEs) as an ocular drug delivery system with desirable therapeutic efficacy. Brinzolamide NEs were prepared by the spontaneous emulsification method. Based on initial release studies, twelve formulations with the slowest release characteristics were subjected to further physicochemical investigations such as particle size, polydispersity index, pH, refractive index, osmolality and viscosity. The therapeutic efficacy of these formulations was assessed by measuring the intraocular pressure after instillation of the prepared NEs in normotensive albino rabbit eyes. Nanoemulsions with suitable physicochemical properties exhibited high formulation stability under different conditions. more over biological evaluations indicated that using lower drug concentrations in NE formulations (0.4%) had a similar or even better pharmacodynamic effect compared to the commercial suspension with a higher drug concentration (1%). Our findings suggest that NEs could be effectively used as carriers for enhancing the bioavailability of topically applied ophthalmic drugs.

Development of an RP-HPLC-UV Method for Simultaneous Detection of Nimodipine and its Metabolite in Cerebrospinal Fluid of Rat.

A rapid, simple and reproducible HPLC method was developed and validated for the analysis of nimodipine (NM) and/or its metabolite, oxidized nimodipine (OX-NM) in rat cerebrospinal fluid (CSF) and artificial CSF. The NM and OX-NM were eluted in less than 10 min with no interferences from the endogenous CSF peaks. Analysis was carried out on a Eurospher Performance (RP-C18, 250 × 4.6 mm) column and UV detection at 236 nm. The mobile phase consisted of acetonitrile and water (70:30 v/v, respectively) with a flow rate of 1 mL/min. Limit of detection was 0.1 µg/mL for OX-NM. The calibration curve was linear over the concentration range of 0.5-10 µg/mL and analytical recovery was more than 95%. The coefficients of variation for intra-day and inter-day assays were less than 5%.

Challenges to Design and Develop of DNA Aptamers for Protein Targets. II. Development of the Aptameric Affinity Ligands Specific to Human Plasma Coagulation Factor VIII Using SEC-SELEX.

Protein specific aptamers are highly applicable affinity ligands in different fields of research and clinical applications. They have been developed against various targets, in particular, bio-macromolecules such as proteins. Among human proteins, the coagulation factors are the most attractive targets for aptamer selection and their specific aptamers have valuable characteristics in therapeutic and analytical applications. In this study, a plasma derived coagulation factor VIII was considered as the protein target for DNA aptamer selection using size exclusion chromatography-SELEX. Potential aptameric oligonucleotides with high affinity and specificity were achieved during eight rounds of selection. Binding affinity constant of selected aptamer and aptameric enriched pool were in nanomolar range that was comparable to monoclonal antibodies. Further improvement studies can result in aptamers that are more promising as an industrial affinity ligand for the purification of anti-hemophilia factor from plasma source.

Laccase Activity in CTAB-Based Water-in-Oil Microemulsions.

The aim of this study was to develop a microemulsion system as a medium for laccase-catalyzed reactions. Phase behavior studies were conducted by constructing partial pseudo-ternary phase diagrams for systems comprising of cetyltrimethylammonium bromide (CTAB), various organic solvents as the oil phase (i.e., hexane, cyclohexane, heptane, octane, isooctane, toluene, isopropyl myristate), two co-surfactants (i.e., 1-butanol and 1-hexanol) and citrate buffer solution, at various surfactant/co-surfactant weight ratios (Rsm). A monophasic, transparent, non-birefringent area (designated as microemulsion domain) was seen to occur in some phase diagrams along the surfactant/organic solvent axis, the extent of which was dependent mainly upon the nature of co-surfactant and Rsm. On each phase diagram, three different water-in-oil (w/o) microemulsion systems with less than 50 wt% surfactant mixture and less than 20 wt% of aqueous phase were selected for laccase loading and activity measurements. Results revealed that the catalytic activity of laccase in CTAB-based w/o microemulsions decreased considerably, compared with its activity in the buffer solution, the extent of which depended upon the type of component and their compositions in the microemulsions. It was suggested that the conformational changes due to the electrostatic interactions between the cationic head group of CTAB and the negative enzyme might be the reason for the reduction of laccase activity, once entrapped in the microemulsion.

Nimodipine-Loaded Pluronic® Block Copolymer Micelles: Preparation, Characterization, In-vitro and In-vivo Studies.

Nimodipine (NM), as a lipophilic calcium channel blocker indicated for the prevention and treatment of neurological disorders, suffers from an extensive first pass metabolism, resulting in low oral bioavailability. Polymeric micelles, self-assembled from amphiphilic polymers, have a core-shell structure which makes them unique nano-carriers with excellent performance as drug delivery. This investigation was aimed to develop NM-loaded polymeric micelles and evaluate their potential to cross the blood brain barrier (BBB). Micelles from Pluronics®P85, F127 and F68 were fabricated for the delivery of NM, using thin film hydration and direct dissolution techniques. Critical micelle concentration of the drug-free micelles was determined by pyrene fluorescence spectroscopy. Dynamic light scattering showed that in most cases, micelles less than 100 nm and low polydispersity indices were successfully developed. Transmission electron microscopy demonstrated spherical shape of micelles. The NM-loaded micelles were also characterized for particle size, morphology, entrapment efficiency, drug loading , in vitro drug release in phosphate buffer and artificial cerebrospinal fluid (CSF). Stability was assessed from size analysis, clarity of dispersion on standing and EE(%), following 3 months storage at room temperature. The in-vitro release of NM from polymeric micelles presented the sustained-release profile. Animal studies revealed the existence of fluorescein 5-isothiocyanate-labeled micelles in rat CSF following intraperitoneal administration, proving that the micelles crossed the BBB. Anticonvulsant effect of NM was shown to be significantly greater than that of NM solution. Our results confirmed that Pluronic micelles might serve as a potential nanocarrier to improve the activity of NM in brain.

Formulation Development and Toxicity Assessment of Triacetin Mediated Nanoemulsions as Novel Delivery Systems for Rapamycin.

The aim of this investigation was to design and develop nanoemulsions (NEs) as novel delivery systems for rapamycin. Phase behavior of quaternary systems composed of Traicetin (as oil), various surfactants and co-surfactants and water at different surfactant/co-surfactant weight ratios was investigated by the construction of phase diagrams. Formulations were taken from the o/w NE region of the phase diagrams, depending upon the extent of NE domain. The spontaneous emulsification method was used to prepare various formulations containing 1 mg/mL of the drug. The NEs were characterized and subjected to stability tests at various temperatures over 9-12 months. Cumulative drug release from the selected formulations was determined for a period of 48 h using a dialysis sac. The assay of rapamycin was carried out using an HPLC technique. The effect of NEs on the viability of SKBR-3 cells was evaluated by MTT assay. The integrity of Caco-2 cell monolayers was measured by Transepithelial Electrical Resistance (TEER) and the transport of rapamycin-loaded NEs across Caco-2 cell monolayers was then assessed. The uptake of NEs by SKBR-3 cells was also investigated using florescence microscopy. Maximum drug release was observed in case of 4 formulations prepared with Tween 80 and Tween 20. MTT test results revealed different toxicity of NEs for SKBR-3 cell line and TEER demonstrated that formulations containing Tween 20 caused a more considerable decrease in cell integrity in comparison with those prepared with Tween 80. The results obtained from cellular uptake experiments were in consistent with those obtained from TEER and cytotoxicity experiments.

Study on the effect of solution conditions on heat induced-aggregation of human alpha interferon.

A major problem in the formulation of therapeutic proteins is the irreversible protein aggregation. Recombinant human interferon alpha2b (rhIFNα2b) has poor stability and undergoes physical degradation. The aim of this study was to investigate the effect of solution conditions on the heat-induced aggregation of rhIFNα2b. The protein was incubated for 1 h at 40-70 °C and for up to 240 h at 50 °C and its aggregation tendency was then studied using optical density (at 350 nm), SE-HPLC, dynamic light scattering and SDS-PAGE methods. The effect of various pH (5, 6 and 7) and buffer concentrations (10, 55 and 100 mM) on the aggregation of protein following incubation at 50 °C for 72 h was also evaluated. The results obtained for samples incubated at 50 °C for up to 240 h showed that OD350 and the amount of higher molecular weight aggregates (HMW) increased and the monomer content decreased significantly (p<0.05) as the incubation time increased. Following incubation at various temperatures, a significant increase in OD350, drop in monomer content and increase in the amount of HMW aggregates were observed (p<0.05). Data obtained from incubation of samples at 50 °C for 72 h confirmed that regardless of the buffer concentration, the percentage of monomer at pH 6 was significantly higher than that at pH 7 and pH 5 (p<0.05). At constant pH, although not significant, the same trend was observed when the buffer concentration increased to 100 mM. In conclusion, the change in solution conditions can influence the aggregation extent of rhIFNα2b.

Challenges to design and develop of DNA aptamers for protein targets. I. Optimization of asymmetric PCR for generation of a single stranded DNA library.

Aptamers, or single stranded oligonucleotides, are produced by systematic evolution of ligands by exponential enrichment, abbreviated as SELEX. In the amplification and regeneration step of SELEX technique, dsDNA is conversed to ssDNA. Asymmetric PCR is one of the methods used for the generation of ssDNA. The purpose of this study was to design a random DNA library for selection of aptamers with high affinity for protein targets and develop an efficient asymmetric PCR amplification. Thus, the influence of factors including annealing temperature, number of amplification cycles, primer ratio, Mg(2+) concentration and the presence of a PCR enhancer on the amplification of the desired product were evaluated. Results obtained by agarose gel electrophoresis showed that the annealing temperature of 64 °C, Mg(2+) concentration of 0.25 mM, reverse to forward primer ratio of 15:1, amplification cycle of 25 and the presence L-ectoin as a PCR enhancer with the concentration of 0.4 M were the optimal conditions. Our results supported that the yield of this type of ssDNA production is sufficient for combinatorial screening of aptamers.

Challenges to Improve the Stability and Efficacy of an Intravesical BCG Product.

The aim of this investigation was to improve the storage stability and survival rate of an intravesical BCG product, manufactured with an attenuated strain of Mycobacterium bovis (Pasteur strain 1173P2 of BCG) in the presence of sodium glutamate. Formulations with various concentrations of trehalose (a known protectant) were developed as liquid and lyophilized forms. Formulations were evaluated by different methods, including optical density measurement, safety assessment, skin reaction test, moisture content determination, viability assay, bacterial and fungal contaminations and the results were compared with those obtained for sodium glutamate-containing formulations. The stability tests were also carried out in various storage durations and different temperatures. To develop the lyophilization protocol, glass transition temperatures in the presence of both stabilizers were determined using differential scanning calorimetry. In general, results showed that trehalose could considerably increase the stability of the product against freezing and drying processes, increase the survival rate even in the liquid formulations, as well as the production of an acceptable cake. However, further studies are required to optimize the product characteristics.

A reversed phase high performance liquid chromatographic method for determination of rapamycin.

Easily degradating and various isomeric forms of rapamycin (Sirolimus) face the determination of this compound to many challenges. In this study, we developed and validated the isocratic reversed phase high performance liquid chromatographic (RP-HPLC) method for rapamycin. Separation was performed on a C8 column (MZ, 15 × 4.6 mm, 5 µm particle size) using methanol:water (80:20 v/v) as the mobile phase with the flow rate of 1 mL/min. The column temperature was set at 57°C and the detection was carried out at the wavelength of 277 nm. The method was linear over a concentration range of 0.025-2 µg/mL. The coefficient of variation of intra- and inter-day, assessed at three concentration levels of 0.075, 0.3 and 0.900 µg/mL, was less than 2%. Limit of quantification (LOQ) was found 25 ng/mL. The method with high percent recovery and short retention time of rapamycin, was found to be simple, rapid and reproducible.

PEGylated single-walled carbon nanotubes as nanocarriers for cyclosporin A delivery.

Single-walled carbon nanotubes (SWCNTs) have attracted the attention of many researchers due to their remarkable physicochemical features and have been found to be a new family of nanovectors for the delivery of therapeutic molecules. The ability of these nanostructures to load large amounts of drug molecules on their outer surface has been considered as the main advantage by many investigators. Here, we report the development of a PEGylated SWCNT-mediated delivery system for cyclosporin A (CsA) as a potent immunosuppressive agent. The available OH group in the CsA structure was first linked to a bi-functional linker (i.e., succinic anhydride) in order to provide a COOH terminal group. CsA succinylation process was optimized by using the modified simplex method. The resulting compound, CsA-CO-(CH(2))(2)-COOH, was then grafted onto the exterior surface of SWCNTs, previously PEGylated with phospholipid-PEG(5000)-NH(2) conjugates, through the formation of an amide bond with the free amine group of PEGylated SWCNTs. Drug loading, stability of the PEGylated SWCNT-CsA complex, and in vitro release of the drug were evaluated. Loading efficiencies of almost 72% and 68% were achieved by UV spectrophotometry and elemental analysis methods, respectively. It was observed that 57.3% of cyclosporine was released from CsA-Pl-PEG(5000)-SWCNTs after 3 days. In this investigation, we conjugated CsA to an amine-terminated phospholipid-polyethylene glycol chain attached on SWCNTs via a cleavable ester bond and demonstrated the possible potential of PEGylated SWCNT-based systems for CsA delivery.

Evaluation of the Effect of PEGylated Single-Walled Carbon Nanotubes on Viability and Proliferation of Jurkat Cells.

Among the numerous nanosized drug delivery systems currently under investigation, carbon nanotubes (CNTs), regardless of being single or multiple-walled, offer several advantages and are considered as promising candidates for drug targeting. Despite the valuable potentials of CNTs in drug delivery, their toxicity still remains an important issue. After the PEGylation of single-walled CNTs (SWCNTs) with phospholipid-PEG (Pl-PEG) conjugates to prepare water-dispersible nanostructures, the present study was designed to evaluate whether the functionalization with Pl-PEG derivatives could alter the cytotoxic response of cells in culture, affect their viability and proliferation. In-vitro cytotoxicity screens were performed on cultured Jurkat cells. The SWCNTs samples used in this exposure were pristine SWCNTs, Pl-PEG 2000/5000-SWCNTs at various concentrations. Jurkat cells were first incubated for 3 h at 37°C with test materials and seeded in 6-well culture plates at a given concentration. The plates were then incubated for 24, 48 and 72 h at 37°C in a 5% CO2 humidified incubator. Cell Viability and proliferation assay were performed using trypan blue exclusion test and the cell cycle kinetic status of Jurkat cells was analyzed by flow cytometry. Cell morphology was finally studied using double staining technique and a fluorescence microscope. We found that, regardless of the duration of exposure, functionalized SWCNTs were substantially less toxic, compared to pure SWCNTs and that the molecular weight of Pl-PEGs played an important role at higher concentrations. In conclusion, our noncovalent protocol seemed to be effective for increasing SWCNTs biocompatibility.

Optimization of single-walled carbon nanotube solubility by noncovalent PEGylation using experimental design methods.

In this study, noncovalent functionalization of single-walled carbon nanotubes (SWCNTs) with phospholipid-polyethylene glycols (Pl-PEGs) was performed to improve the solubility of SWCNTs in aqueous solution. Two kinds of PEG derivatives, ie, Pl-PEG 2000 and Pl-PEG 5000, were used for the PEGylation process. An experimental design technique (D-optimal design and second-order polynomial equations) was applied to investigate the effect of variables on PEGylation and the solubility of SWCNTs. The type of PEG derivative was selected as a qualitative parameter, and the PEG/SWCNT weight ratio and sonication time were applied as quantitative variables for the experimental design. Optimization was performed for two responses, aqueous solubility and loading efficiency. The grafting of PEG to the carbon nanostructure was determined by thermogravimetric analysis, Raman spectroscopy, and scanning electron microscopy. Aqueous solubility and loading efficiency were determined by ultraviolet-visible spectrophotometry and measurement of free amine groups, respectively. Results showed that Pl-PEGs were grafted onto SWCNTs. Aqueous solubility of 0.84 mg/mL and loading efficiency of nearly 98% were achieved for the prepared Pl-PEG 5000-SWCNT conjugates. Evaluation of functionalized SWCNTs showed that our noncovalent functionalization protocol could considerably increase aqueous solubility, which is an essential criterion in the design of a carbon nanotube-based drug delivery system and its biodistribution.

An Approach to the Design of a Particulate System for Oral Protein Delivery .II. Preparation and Stability Study of rhGH-Loaded Microspheres in Simulated Gastrointestinal Fluids.

The delivery of therapeutic proteins has gained momentum with development of biotechnology. However, large molecular weight, hydrophilic nature and susceptibility to harsh environment of gastrointestinal tract (GIT) resulted in low absorption. The main objective of this work was the design of a particulate system for oral delivery of recombinant human growth hormone (rhGH) on the basis of particle uptake mechanism in GIT. Biodegradable protein-loaded microspheres were prepared using Resomers (RG207, RG756 and RG505) by double emulsion methods. Aqueous solution of protein and freshly prepared rhGH-zinc complex were used for loading process. Various analytical methods, including fluorescence spectroscopy, SDS-PAGE electrophoresis and reversed-phase chromatography, were set up for the quantification and qualification of rhGH before and after the formulation and fabrication procedures. At the optimum conditions, microspheres were mostly below 10 µm with relatively high protein loading (> 50%). Obtained data showed that the stability of protein did not change during the formulation and microencapsulation processes. Results also showed that the encapsulation process in the presence of zinc caused no detectable change in the protein chemical stability. In-vitro stability study of microspheres in different simulated GI media indicated that the entrapped protein was physically stable. Less than 20% of rhGH was released from the microspheres incubated in both simulated stomach and intestine fluids for 3 and 6 h, respectively.